SPC Flooring

SPC Click Lock Flooring 1220 x 180 mm 6.5 mm Waterproof Rigid Core Planks with IXPE Underlay for Living Rooms and Rental Renovation

SPC click-lock flooring is a rigid stone-polymer plank installed without glue over flat subfloors in living rooms, bedrooms and rental units. Planks measure 1220 x 180 mm with a 6.5 mm core, 0.3 mm wear layer and attached 1.5 mm IXPE pad for footfall sound absorption. An HD film reproduces pale oak grain along the full plank, and the 5S UV surface resists scuffs. UNILIN click edges allow floating installation over concrete, tile or plywood. The waterproof, termite-resistant B1 flame-retardant core is formaldehyde-free and ECO certified, suiting kitchens, basements and shops. Not for outdoor decks or rooms with standing water.

Updated 2026-10-20
ECO
Technical details

Full Specifications

No specifications available.

Key Facts

  • The SMR-HP-3035 plank measures 1220 x 180 mm and is 6.5 mm thick, built from a 5 mm rigid SPC board plus a 1.5 mm IXPE acoustic pad.
  • A 20 m² room needs about 92 planks at 1220 x 180 mm, before allowing 5–10% extra for cutting waste.
  • UNILIN click-lock joints need no glue or nails, so planks float over concrete, ceramic tile or plywood subfloors.
  • A 0.3 mm wear layer covers the HD colour film, and the 5S UV finish is formulated to resist scuffs in hallways and retail showrooms.
  • The core is formaldehyde-free, ECO certified, B1 flame retardant, waterproof and termite resistant, but the floor is not intended for outdoor decks or permanently wet areas.